DOUBLE ECCENTRIC BUTTERFLY VALVE, MECH. JOINTS
MJxMJ, C504, seal on disc, 150 psi, SS 431 shafts, IP68 gearbox, 2" op. nut, OL/OR
Contact
American AVK
2155 Meridian Blvd. Minden, NV 89423
Double eccentric butterfly valve to AWWA C504 with stainless steel seat and IP68 gearbox with handwheel, for drinking water and neutral liquids to max. 160°F
AVK double eccentric butterfly valves are designed for extended service life and easy operation. The disc seal is made of AVK's drinking water approved EPDM rubber featuring an excellent compression set and thus ability to regain its original shape. The NSF approved epoxy coating and fully encapsulated shaft/disc connection ensure high durability. The valves are suitable for bi-directional application.
| Variant 766/1496-001 | |
|---|---|
| Connection: | Mechanical Joints |
| Material: | Ductile Iron |
| PN: | 250 psi |
| Closing direction: | Open Left |
Features
- Double eccentric design causes the seal compression to release after just a few degrees of opening reducing operating torque
- Flow-through disc with a stiff, light weight box-design for high flow velocity applications; low sensitivity to cavitation prevents turbulent flow
- Rubber seal around the disc circumference held in place by an SS316 disk ring
- Drinking water approval for all rubber parts in contact with the water
- Shaft in stainless steel
- Anti blow-out shaft design with replacable O-ring shaft seal and self lubricating bronze/PTFE radial bearings. A replaceable POM disc at the end of the stub shaft serves as thrust bearing
- Shaft ends fully encapsulated in disc and fixed with dowels corrosion protected with O-rings and a stainless steel security plate; a safety key backs up the dowel connection
- Gearbox in IP68 for buried applications
- Fasteners in stainless steel A4
- Body and disc of ductile iron coated with blue RAL 5017 fusion bonded epoxy to AWWA C550, GSK, and approved by WRAS-DVGW/W270/UBA
Downloads
Datasheet
Installation, Operation & Maintenance
Details
Product Brochure
Video
Price List
Components
| 1. | Gearbox | Cast iron |
| 2. | Drive shaft | Stainless steel 431 |
| 3. | Body | Ductile iron 65-45-12 |
| 4. | Disc | Ductile iron 65-45-12 |
| 5. | Stub shaft | Stainless steel 431 |
| 6. | Security plate | Stainless steel 316 |
| 7. | Washer | Stainless steel A4-70 |
| 8. | Bolt | Stainless steel A4-70 |
| 9. | O-ring | EPDM |
| 10. | Dowel Pin | Stainless steel 431 |
| 11. | Seal retainer ring | Stainless steel 316 |
| 12. | Disc Seal | EPDM |
| 13. | Seal housing | Bronze CC331G (AB1) |
| 14. | Thrust bearing | Stainless steel 316 |
| 15. | Washer | POM |
| 16. | End cover | Ductile iron 65-45-12 |
| 17. | Key | Stainless steel A4-70 |
| 18. | Seal housing | Bronze CC331G (AB1) |
| 19. | Radial bearing | Bronze/PTFE composite |
| 20. | Seat ring | Stainless steel 316 |
| 21. | Disc cover | Stainless steel 316 |
| 22. | Gasket | EPDM |
| 23. | Safety key | Stainless steel 431 |
Test/Approvals
- Approved according to ANSI/NSF Standard 61
- Approved according to ANSI/NSF Standard 372
Standards
- Designed according to AWWA C504
